NET Ethernet adapter
Connect the ethernet side to a standard PoE network switch and connect the serial port to a Twinleaf device. It's OK if you get them backward on standard PoE 802.3af hardware (but not OK if you're trying to use a direct DC power injection). Then access the device using the default address at udp://tio-NET.local
. It is possible to proxy the connection to TCP using tio-proxy udp://tio-NET.local
, and thereby allow many clients to connect to the device.
Features
- RJ-45 8p8c connector: Power, LVDS Serial, LVDS Sync Clock
- Ethernet port
- Power over ethernet (802.3af): ~10 W
- Volume: 14×14×80 mm³
- Mass: 60 g
Interface
- Software support
Firmware
Firmware update: NET-R3-firmware-2019-10-03-5f7942.bin
Ordering
NET, $990.